Water heaters are one of the most neglected appliances in households. As long as people have access to hot water, they tend to ignore its maintenance and repair. If your water heater is malfunctioning, you shouldn’t wait to get it fixed as it can exacerbate the problem. Here are some common water heater problems and how to avoid them.

Insufficient Hot Water

Insufficient amount of hot water is perhaps the most common water heating problem faced by homeowners. There can be several reasons behind the shortage of hot water, but in many cases, the size of the water heater itself is the actual problem. If you’ve got a large family; they might be using hot water all at once, leading to a shortage of water. If that’s true in your case, consider replacing your water heater with a larger one or perhaps buy an additional water heater to ensure adequate hot water supply. That being said, a shortage of hot water can also be caused due to a faulty water heater. For instance, a faulty dip tube may cause cold water to mix with the hot water in the tank. Also, there might be a problem with the heating equipment. No matter the issue is, it’s important to get it checked from professional water heating service provider to detect the issue accurately and get it resolved.

Water Heating Extremely Slow

A faulty heating element or lack of insulation can slow down the water heating process, which can be very frustrating and wastes your time. Moreover, the diameter and length of the pipe can also a problem, affecting the capacity of your water heater to heat up the water quickly. In addition to that, if your heater is installed far away from the outlet, it can also slow down the heating process. Again, you’ll need to hire services of reliable water heating service provider to identify the problem correctly. In case of poor insulation, they’ll make repairs, but if the heating element is damaged, you’ll probably require making a replacement. You can also switch to a tankless water heater to ensure that you have access to instant hot water.

The Water is Too Hot

If the water temperature is too hot, the most obvious course of action is to adjust the settings of the thermostat(s) to lower the temperature.

However, if the problem persists, it’s possible that your thermostat is damaged and you may need a replacement. Also, there can be some wiring issue that might be causing this problem. It’s not a major issue and your repair technician will easily be able to diagnose the problem and solve it.

Dirty or Rusty Colored Water

If the water of your heating tank is dirty or corroded, it’s a clear sign of corrosion and rust buildup. It can be caused due to corroded anode rods or build up of sediments at the bottom of your water tank. If not treated timely, it can cause irreversible damage to your water tank, which will be beyond repair and will likely require a replacement.

Final Words

These were just a few of the many common water heating problems that you may have to deal with at some point in time. Learning about these issues can help you take corrective measures in a timely manner. If you live in Miami and looking for reliable repair and maintenance services for your water heater, contact Miami Water Heater. We’ve been working in the water heating industry for over 70 years, providing affordable high-quality water heating solutions to our clients. With decades of experience and a professional team of insured and licensed technicians, we can help you fix any water heating problem in the most efficient and timely way. We also have quality water heating products that you can check out on our website.

Miami Water Heater is also a City Gas Authorized Service Contractor and a certified Rheem warranty facility. If you buy your water heater from us, all you have to do is give us a call and we’ll handle the rest of the process.